Hrs Process Systems Limited

The heart of HRS PHE is a pack of embossed plates with apertures. The plates are assembled in a 180° angle to each other, resulting in flow gaps on each side. Each plate is provided with a gasket, which securely seals the flow gaps from the atmosphere and separates the two media used in the heat exchange. The gasketed plate pack is mounted in a rack and is compressed with tightening bolts between the fixed plate and the movable plate.

HRS Funke Plate Heat Exchangers range consist of gasketed, brazed and cladded PHEs for specialized applications in food and dairy industry. PHE can be offered in various sizes to allow heat transfer area upto 2400 m².

Advantages ·         Compact design, light weight ·         Optimum heat transfer by means of special plate embossing and installed turbulators ·         Series for special applications like oil and gas cooling ·         Durable and easy-to-maintain ·         Extensive application know-how, covering a lot of industrial branches and further heat transfer technologies   Applications

Heating, cooling, condensing in process technology as well as refrigeration engineering, for instance

·         Cooling of lubricating-oil

·         District heat transfer stations

·         Hot-water/process water

·         Heating engineering (solar heating central heating, underfloor heating)

·         Vaporiser / condenser in refrigeration plant

Media

·         Oil / Water

·         Water / Water

·         Gas / Liquid (condensation)

·         Specific media on request

Additional Information:

• Delivery Time: 3 weeks
• Packaging Details: Wooden box with Base Metal Plate

The heart of a Plate Heat Exchanger is a pack of embossed plates with apertures. The plates are assembled in a 180 Degree angle to each other, resulting in flow gaps on each side. Each plate is provided with a gasket, which securely seals the flow gaps from the atmosphere and separates the two media used in the heat exchange. The gasket plate pack is mounted in a rack and is compressed with tightening bolts between the fixed plate and the movable plate. To guarantee maximum heat transfer, warm and cold media are normally fed through the PHE in one-pass or multi-pass counterflow. Connections are on the fixed plate, but can also be on the movable plate for multipass flow. 

Advantages:

• Low investment, operation, and maintenance costs.
• Highly efficient heat transfer (K- values on average 3-5 times higher than in the case of bare-tube heat exchangers).
• Asymmetrical flow gap is available for the most cost-effective solution.
• Use of smallest temperature difference
• Up to 75% less space required.
• The self-cleaning effect due to highly turbulent flow behavior
• Future additional capacity is possible by fitting extra heat transfer plates
• Double gasket with leak groove gives high safety with regards to media mixing.
• Easy to open/clean
• Low operating weight/low liquid content.

Additional Information:

• Delivery Time: 2 weeks

HRS Process Systems Ltd. have acquired exclusive rights by the way of license manufacturing agreement for design, manufacture, supply and service of Plate Heat Exchangers, with FUNKE Waermaustauscher GmbH!

A large range of standard and special designs of the Brazed Plate Heat Exchanger can cover a wide spectrum of process applications across industrial and domestic sectors as an economical solution for heat transfer.

Additional Information:

• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.

Advantages

·         Easy to open/clean, service

·         Up to 75% less space required

·         Self-cleaning effect due to highly turbulent flow behavior

·         Use of smallest temperature difference

·         Double gasket with leak groove gives high safety with regards to media mixing

·         Gaskets fastened by "Clip-system" for easy maintenance.

·         Gaskets have a special ribbed surface, enabling more exact centering and stabilization of the entire plate pack

·         Double gasket with leakage groove between two media, preventing mixing of the media

·         Special plate profile at the edges, reinforcing the plate pack and ensuring high pressure resistance of the gasket during operation

·         Secured seal with number of two-pronged clips that slide beneath the plate to hold the gasket

·         Specially embossed entry fields for an optimum distribution of media

Applications

·         Heating, cooling, chilling, condensing for process fluids

·         Heating, cooling in refrigeration engineering

·         Vaporizer / condenser in refrigeration plant

·         Pasteurization, Sterilization

·         Cooling of lubricating-oil

·         District heat transfer stations

·         Instant Hot-water/process water generation

·         Heating engineering (solar heating central heating, underfloor heating)

Additional Information:

• Delivery Time: As per project
• Packaging Details: Wooden box with Metal base support

HRS Process Systems Ltd. have acquired exclusive rights by the way of license manufacturing agreement for design, manufacture, supply and service of Plate Heat Exchangers, with FUNKE Waermaustauscher GmbH!

A large range of standard and special designs of the Brazed Plate Heat Exchanger can cover a wide spectrum of process applications across industrial and domestic sectors as an economical solution for heat transfer.

Additional Information:

• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.

The heart of a Plate Heat Exchanger is a pack of embossed plates with apertures. The plates are assembled in a 180° angle to each other, resulting in flow gaps on each side. Each plate is provided with a gasket, which securely seals the flow gaps from the atmosphere and separates the two media used in the heat exchange. The gasket plate pack is mounted in a rack and is compressed with tightening bolts between the fixed plate and the movable plate. To guarantee maximum heat transfer, warm and cold media are normally fed through the PHE in one-pass or multi-pass counterflow. Connections are on the fixed plate, but can also be on the movable plate for multipass flow.

Advantages:

• Low investment, operation, and maintenance costs.
• Highly efficient heat transfer (K- values on average 3-5 times higher than in the case of bare-tube heat exchangers).
• Asymmetrical flow gap is available for the most cost-effective solution.
• Use of smallest temperature difference
• Up to 75% less space required.
• The self-cleaning effect due to highly turbulent flow behavior
• Future additional capacity is possible by fitting extra heat transfer plates
• Double gasket with leak groove gives high safety with regards to media mixing.
• Easy to open/clean
• Low operating weight/low liquid content.

Additional Information:

• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.

HRS Process System manufactures wide range of Heat Exchangers which are suitable for the various industries to effectively transfer the heat between two fluids. These products are manufactured with high quality stainless steel. This heat exchanger provides exceptional heat transfer efficiency, high corrosion resistance and capability to be operational in harsh environment and chemicals.

 

Advantages:

·         Robust Construction

·         Efficient Heat

·         Corrosion Resistance

·         Customizable Solutions

·         Low Maintenance

Applications:

·         Chemical Processing

·         Oil and Gas

·         Power Generation

·         Food and Beverage

Additional Information:

• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.

HRS Process System manufactures wide range of Heat Exchangers which are suitable for the various industries to effectively transfer the heat between two fluids. These products are manufactured with high quality stainless steel. This heat exchanger provides exceptional heat transfer efficiency, high corrosion resistance and capability to be operational in harsh environment and chemicals.

 

Advantages:

·         Robust Construction

·         Efficient Heat

·         Corrosion Resistance

·         Customizable Solutions

·         Low Maintenance

Applications:

·         Chemical Processing

·         Oil and Gas

·         Power Generation

·         Food and Beverage

Additional Information:

• Production Capacity: upto 16 bar pressure
• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.

 

Advantages

·         Easy to open/clean, service

·         Up to 75% less space required

·         Self-cleaning effect due to highly turbulent flow behavior

·         Use of smallest temperature difference

·         Double gasket with leak groove gives high safety with regards to media mixing

·         Gaskets fastened by "Clip-system" for easy maintenance.

·         Gaskets have a special ribbed surface, enabling more exact centering and stabilization of the entire plate pack

·         Double gasket with leakage groove between two media, preventing mixing of the media

·         Special plate profile at the edges, reinforcing the plate pack and ensuring high pressure resistance of the gasket during operation

·         Secured seal with number of two-pronged clips that slide beneath the plate to hold the gasket

·         Specially embossed entry fields for an optimum distribution of media

Applications

·         Heating, cooling, chilling, condensing for process fluids

·         Heating, cooling in refrigeration engineering

·         Vaporizer / condenser in refrigeration plant

·         Pasteurization, Sterilization

·         Cooling of lubricating-oil

·         District heat transfer stations

·         Instant Hot-water/process water generation

·         Heating engineering (solar heating central heating, underfloor heating)

Features

·         Well-researched in-house design

·         Variations in plate embossing for highest efficiency

·         Available in a range of SS, exotic materials to suit the process needs

·         Multi section units consisting two or more plate packs separated by intermediate plate or C-Plates

 

Advantages

·         Designed to hygiene / sanitary standards required for sensitive processes

·         Reduction in operational downtime due to glue-less clip type gaskets

·         Secured seal with number of two-pronged clips that slide beneath the plate to hold the gasket

·         Avoid cross contamination of two fluids by double seal arrangement

 

Application:

 

Ideal for Heating, Cooling, Chilling, Pasteurization, Sterilization (please add industries and rephrase this sentence)

Additional Information:

• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.

The plate-type heat exchanger comprises a plate pack mounted between fixed and pressure plates compressed with tightening bolts. Depending on the process requirement, variations in the passes can be designed to enable counterflow. This makes the gasketed plate heat exchanger a highly efficient heat exchanger type for many liquid-liquid applications such as water, oil, suspensions, chemicals, infusions, milk, juices, beverages, etc. For applications in the food industry, we offer specially developed CLADDED plate heat exchangers to ensure the safe processing of sensitive fluids.

Additional Information:

• Production Capacity: Upto 25 bar
• Delivery Time: As per project
• Packaging Details: Wooden Box Packing with Base Metal Support.